. MAINTENANCE MAINTENANCE PROCEDURE CHECK OIL LEVEL IN SWING MACHINERY CASE, ADD OIL WARNING the engine is stopped and may cause serious burns. Wait for the oil 1. Remove dipstick (G) and wipe the oil from the dipstick with a cloth. 2. Fully insert dipstick (G) into the filler pipe. (H) and (L) marks on the dipstick. 4. If the oil does not reach the (L) mark on dipstick (G), remove the cap of oil filler port (F) and add oil. Remove dipstick (G) when adding oil. draining the oil. the hole and install oil filler (F) cap. 4 - 62 after temperature to go down before performing this operation 3. Pull out dipstick (G ) and check that the oil level is between the 5.
If the oil is above t he H line on dipstick (G), re move c over (1) ss oil from drain plug (P). to catch the oil under drain v alve (P ) before 6. After checking oil l evel or adding oil, insert the d ipstick (G) i nto