Komatsu — EVERY 5000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE container under the drain plug under the machine. (PAGE 4-44)". 4 - 81 5. Remove un 6. Set andle, remove drain plug (P) a nd drain the oil. Check the O-ring installed to plug (P), and i f it is damaged, replace the O-ring. After dra ining the oil, tighte n drain plug (P). Tightenin 58.8 to 7 g torque of drai 8.5 Nm (6 to 8 k n plug (P): gm, 43.3 to 57.9 l When re yourself. 7. Add the repl acement amou nt of oil through oil filler (F). Check that the oil le vel is between t he H and L lines o n the sight gauge (G). For details o f oil level check , see "Check Oil L evel in Hydraulic Tank, Add Oil (PAGE 3-77) 8.

Install unde rcover (1). 9. Bleed the ai r from the hydra For details o f the method of bleeding the air fr om the hydraulic circuit, see