. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT Attachment Control Pedal WARNING pedal are Hydraulic breaker Front of pedal (A): Actuated Center of pedal (N): Stopped Rear of pedal (B): Stopped 6 - 5 Do not carry out o perations with your foot on t he pedal. If the p edal is depressed by mistake, t he attachme nt may suddenly move and cause a serio us accident.
Lock the pedal with the lock pin when you ar e no t operating th e attachme This pedal (2) i s used to control the attac When the fron t, center (neutral), and depressed, the movement of the attachm ent is as follow Regarding othe r attachments, hold a me eting with the a ttachment maker at the ti me of installation to conf irm the operation of the pedal and attac hment before using it. Lock Pin ks the control pedal. cked ly front of pedal can be operated to full position ar is locked) th front and rear of pedal can be operated to full sition This pin (3) loc Position (a): Lo Position (b): On (re Position (c): Bo po When not us ing the attachment, set th e lock pin to po sition (a).
When using a breaker, select B mode o n the monitor a nd set the lock pin to po sition (b). When using a Crasher, select P or E mode on the m onitor and set the lock p in to position (c). NOTICE When using a bre aker, if the lock pin is set to p osition (c) and th e rear portion (B) of the pedal i s depressed , it will cause defective operation or brea kage of the breaker, so alwa ys set the lock pi n to position (b) when u sing th e breaker.