. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENT OPERATIONS WARNING operated. The method of operating the attachment is as follows. When Using Breaker With the working mode set to B mode, insert the lock pin in front-only FREE position (b). Press the front of the pedal to operate the breaker. 6 - 19 I f the pedal is operated when th e auto-deceleration is being actuated a nd the engine speed ha s dropped, t he engine spe ed will suddenly rise, so be careful wh I f you leave your foot resting on the pedal and depress the pedal by mi stake, t here is danger t hat the attac hment may su ddenly move and cause serious perso nal injury.
If you do not need to operat e the p edal, do not res t your foot o n the pedal. When the attachment is not be ing used, set the lock pin of the pedal to the LOCK position to prevent t he pedal from being 1. Set the working mode to B 2. If it is necessary to adjust the oil flow, see "Setting Oil Flow ( PAGE Precautions when using s at the FREE position. de is B mode. e oil, see "HYDRAULIC CIRCUIT (PAGE 6-8)". r it is necessary to install an accumulator for the attachment circuit, contact the nd then decide.
Check that the stop valve i Check that the working mo For details of the path of th e oil, see "HYDRAULIC CIRCUIT (PAG When considering whethe attachment manufacturer a For other precautions when handling the breaker, follow the i nstruction m anual fr om the bre aker manufacturer and use the breaker correc tly. The deterioration of the hyd raulic oil when using the breaker is much faster than for normal ope rations, so r educe the maintenance interval fo r the hydraulic oil and element. LIC BREAKER (PAGE 4-17)". For details, see "MAINTEN ANCE INTERVAL FOR HYDRAU LIC BREAKER (PA