. ATTACHMENTS AND OPTIONS BLADE BLADE DETAILED CONTROLS BLADE CONTROL AND OPERATION WARNING 6 - 28 Blade Control Lever This lever (1 ) is used to control the blade (a): LOWER (b):
RAISE If the lever is o perated when the engine speed h as been lowered by the auto-deceleration function, the engine speed will suddenly rise, operate t he levers car Use the bla de control le ver to operate the Not e that w hen the leve r is released, its r eturn to the HOLD p osition and the blade is hel B lade co ove the lever on the right side of the o perator's seat to the f ront r rear to operate the If th e work e quipment co ntrol levers are r eturned to the neutr al position when the machin e is stopped, even if the fuel control dial is set to FULL, the auto-de celeration mechanis m will act to reduce the eng ine speed to a mid-range spe REMARK The control circuit on thi s machine is equ ipped with an accumulator .
Even if the engine is stopped, if the starting swit ch key i s turned to th e ON position wi thin 15 seconds afte r stopping the engine, and t he lock lever is set to the FRE E positi on, it is poss ible to use the le ver operation to low er the work equipment to th e ground. This proced ure can also be used for releas ing the remaining pr essure in the hydraulic cylin der circuits or for lowering the boom af ter loading t he machine onto a trailer.