. OPERATION DETAILED CONTROLS AND GAUGES Gauges and Meter 3 - 20 Engine Coolant Temperature G auge e coolant temperature. icator should be in the black range the red range (A) - (B) during ention system is actuated. Gauge (8) indicates the engin During normal operations, ind (A) - (C). If indicator enters operations, the overheat prev (A) - (B): Red range (A) - (C): Black range The overheat prevention syste m acts as follows. e water temperature monitor (D) up red. e speed is reduced to low idling, e water temperature monitor (D) Red range position (A) : Engin lights Red range position (B) : Engin engin lights soun The overheat prevention sy up red, and the alarm buzzer ds at same time.
stem remains actuated until the ange. the indicator is at position (C), nitor (D) lights up white. ming-up operation. For details, see 2)". indicator returns to the black r When the engine is started, if engine water temperature mo In this case, carry out the war "Engine Warm Up (PAGE 3-9 Fuel Gauge This meter (9) displays the lev el of the fuel in the fuel tank. During operations, the indicator shou ld be in the black range. If the indicator enters red rang e (A) during operations, there is less than 60 liters (15.85 US gal) of fuel remaining in the tank, so check and add fuel. (A) - (B): Red range (A) - (C):
Black range REMARK When the indicator reaches r ed range (B), there is less than 40 maining. liters (10.57 US gal) of fuel re When the indicator is in red ra nge (B), fuel level monitor (D) lights up red. The correct fuel level may not be displayed for a short time when the starting switch is turned O N, but this is not an abnormality.