hyundai — 5. COMBINED OPERATION

5. COMBINED SWING AND TRAVEL OPERATION ARM CYLINDER BUCKET CYLINDER BOOM CYLINDER TRAVEL MOTOR SWING MOTOR A2 PUMP A1 PUMP PILOT PUMP HYDRAULIC TANK 220S3HC21 When the swing and travel functions are operated, simultaneously the swing spool and travel spools in the main control valve are moved to the functional position by the pilot oil pressure from the remote control valve and straight travel spool is pushed to the right by the pilot oil pressure from the pilot pump. The oil from the A1 pump flows into the travel motors through the RH travel spool of the left control valve and the LH travel spool of the right control valve via the straight travel spool.

The oil from the A2 pump flows into the swing motor through the straight travel spool. When the pressure of the travel motors is lower than the pressure of the swing motor, some oil from the A2 pump flows into the travel motors through the check valve and orifice in the straight travel spool. This prevents the rapid slowdown of the travel. The upper structure swings and the machine travels straight.

3-27 BC1 N RV2 Cck DR9 Co P05 Do PCo PDo OPTION Ca Da BC2 NRV1 Cco CoR AkR LCk1 LCk2 DoR P04 PBk PAk PCbc PBa2 PAa2 DR6 P02 PBa Abk PBrc PAbk DR4 OPTION LCo CaR DaR BUCKET BbkR DR7 CRa PaL ARM1 LCa LCa2 ARM2 PAa2 DR6 2 PCsp PDb2 BOOM2 Ccb SWING P/R LCar LCbk BbR ARM REGEN P02 Abk PBrc PAbk DR4 Cs Ds PCs PDs DR5 SWING LCs AbR LCb CRb BOOM1 P03 DR3 Ctl Dtl PCtl PDtl PattPS ( TR RIG AVH ET L) DR1 P01 PtrPS TS BtR AtR (RIGHT) TRAVEL (LEFT) TRAVEL MRV