GROUP 8 SELF-DIAGNOSTIC SYSTEM 1. OUTLINE When any abnormality occurs in the NEW CAPO system caused by electric parts malfunction and by open or short circuit, the MCU diagnoses the problem and sends the error codes to the cluster and also stores them in the memory. The current or recorded error codes are displayed at the error display mode selected by touching SELECT switch 2 times while pressing BUZZER STOP switch. 2. CURRENT ERROR DISPLAY Cluster displays Co : Er and makes buzzer sound itself to warn the communication error when communication problem caused by wire-cut or malfunction of the MCU occurs. Cluster displays real time error codes received from MCU through communication.
In case of no problem it displays CHECK Er : 00. If there are more than 2 error codes, each one can be displayed by pressing and switch respectively. Examples : 1) Communication Error Co : Er & Buzzer sound 2) No problem CHECK Er : 0 0 3) 4 Error codes(03, 06, 10, 43) display CHECK Er : 0 3 0 3 0 6 1 0 4 3 Start Press Press Press No change Press Press Press Press 3. RECORDED ERROR DISPLAY The recorded error can be displayed only when the start switch is at ON position. Examples : 5 Recorded error codes(03, # 06, # 10, 20, 32) display TIME Er : 0 3 Press Press Press Press 0 3 0 6 1 0 2 0 Start 3 2 No change Press Press Press Press Press 4.
DELETE ALL RECORDED ERROR CODES Select recorded error( TIME Er) display and press engine and select switch at the same time for 2 seconds or more. Cluster display changes to TIME Er : 00, which shows that MCU deleted all the recorded error codes in the memory. 5-11