5. MCU LED (1) To match the engine torque with the pump absorption torque, MCU varies EPPR valve output pressure, which control pump discharge amount whenever feedbacked engine speed drops under the reference rpm of each mode set. R Y G (2) Three LED lamps on the MCU display as below. MODEL: PART NO: 210S5MS64A G : green, R : red, Y :
yellow 5-18 LED lamp Trouble Service G is turned ON Normal - G and R are turned ON Trouble on MCU or ROM 余Change the MCU G and Y are turned ON Trouble on serial communication line 余Check if serial communication lines between MCU and cluster are disconnected Three LED are turned OFF Trouble on MCU power 余Check if the input power wire ( 2 4 V, G N D ) o f M C U i s disconnected 余Check the fuse