余 : Rating over-front : Rating over-side or 360 degree 余 Lift‐point height (m/ft) 7.5m 24.6ft 6.0m 19.7ft 4.5m 14.8ft 3.0m 9.8ft 1.5m 4.9ft 0.0m 0.0ft ‐1.5m ‐4.9ft ‐3.0m ‐9.8ft ‐4.5m ‐14.8ft Note 1. 2. Lifting capacity are based on ISO 10567. Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. The Lift-point is bucket pivot mounting pin on the arm (without bucket mass). * Indicates load limited by hydraulic capacity. 3. 4. 侍 Lifting capacities are based upon a standard machine conditions. Lifting capacities will vary with different work tools, ground conditions and attachments.
The difference between the weight of a work tool attachment must be subtracted. Consult your Hyundai dealer regarding the lifting capacities for specific work tools and attachments. Failure to comply to the rated load can cause possible personal injury or property damage. Make adjustments to the rated load as necessory for non-standard configurations. Model Type Bo Boom Length Le om Arm type type [mm] [m ngth BK type Ca m] Swing pa.[㎥] QC Post Shoe Ou CWT[kg] (wheel) [mm] ttriger[ F] Outtriger[ R] Cabin type HX210HD OPT MO NO GP 5680 GP 2 400 GP 0.92 NO NO 3600 600 NONE NONE CABIN Lift‐point radius 3.0m (9.8ft) 4.5m (14.8ft) 6.0m (19.7ft) 7.5m (24.6ft) At max.
reach 8ft) 6.0m (19 .7ft) 7.5m (24.6ft) Capacity Reach m(ft) kg lb *5080 4910 *11200 10820 5.58 (18.3) kg lb *4980 *10980 4380 9660 *4620 3490 *10190 7690 6.82 (22.4) kg *6320 * lb *13930 * 6320 *5430 13930 *11970 4230 4520 292 9330 9960 644 0 4470 2880 0 9850 6350 7.55 (24.8) kg *8110 lb *17880 1 6050 *6200 3340 *13670 3990 4440 284 8800 9790 626 0 4050 2590 0 8930 5710 7.94 (26.1) kg 9370 lb 20660 1 5590 6030 2320 13290 3770 4330 274 8310 9550 604 0 3910 2480 0 8620 5470 8.03 (26.3) kg 9130 lb 20130 1 5390 5870 1880 12940 3630 4260 268 8000 9390 591 0 4010 2530 0 8840 5580 7.83 (25.7) kg *10830 10320 9110 lb *23880 22750 20080 1 5370 5820 1840 12830 3590 7910 4420 2770 9740 6110 7.31 (24.0) kg *13210 10520 9230 lb *29120 23190 20350 1 5470 5910 2060 13030 3670 8090 5410 3390 11930 7470 6.40 (21.0) kg *7130 lb *15720 1 5770 2720 *6300 5160 *13890 11380 4.89 (16.0) s are based upon a stan dard machin