hyundai — 1. OPERATIONAL PERFORMANCE TEST

17) SYSTEM PRESSURE REGULATOR RELIEF SETTING Unit : kgf / cm 2 7-20 (1)Preparation 刮Stop the engine. 刯Loosen the cap and relieve the pressure in the tank by pushing the top of the air breather. 到Push the pressure release button to bleed air. 刱To measure the main pump pressure. Install a connector and pressure gauge assembly main pump gauge port as shown. 刲Start the engine and check for oil leakage from the port. 刳Keep the hydraulic oil temperature at 50佳5˚C. (2)Measurement 刮Select the following switch positions. 余Power mode switch : M mode 刯Slowly operate each control lever of boom, arm and bucket functions at full stroke over relief and measure the pressure.

到In the swing function, place bucket against an immovable object and measure the relief pressure. 刱In the travel function, lock undercarriage with an immovable object and measure the relief pressure. (3)Evaluation The average measured pressure should b e within the following specifications. Model Function to be tested Standard Remarks HX210HD HX220HD Boom, Arm, Bucket 350佳10 - Travel 350佳10 - Swing 250佳10 -