hyundai — 3. PUMP DEVICE

3) DISASSEMBLY (1) 侍 侍 Select place suitable to disassembling. Select clean place. Spread rubber sheet, cloth or so on on overhaul workbench top to prevent parts from being damaged. (2) Remove dust, rust, etc, from pump surfaces with cleaning oil or so on. (3) Remove drain port plug (468) and let oil out of pump casing (front and rear pump). Remove hexagon socket head bolts (412, 413) and remove regulator. (4) (210-7) MP01 (5) Loosen hexagon socket head bolts (401) which tighten swash plate support (251), pump casing (271) and valve block (312). If gear pump and so on are fitted to rear face of pump, remove them before starting this work.

侍 (6) Place pump horizontally on workbench with its regulator-fitting surface down and separate pump casing (271) from valve block (312). Before bringing this surface down, spread rubber sheet on workbench without fail to prevent this surface from being damaged. 侍 (210-7) MP02 8-13