Caulk carrier holes as shown on the picture. (4) 25098TM146 3) ASSEMBLING CARRIER 2 ASSY (1) Put No.2 carrier on a flat place. (2) Install No.2 needle bearing into No.2 planetary gear, put 2EA of No.2 thrust washer on both sides of planetary gear, and then, install it into carrier. 25098TM147 (3) After install solid pin into the holes, install No.2 pin into No.1 carrier where the holes for No.1 pin are to be in line with those of No.1 carrier, and then, install spring pins into the holes. (4) Caulk carrier holes as shown on the picture. 25098TM148 ASSEMBLING FLOATING SEAL 4) (1) Assemble floating seal into motor by use of pressing jig.
Grease the contact parts for floating seal which is assembled into motor. 侍 Be sure to maintain it vertical with the ground when assembling bearing and floating seal. 25098TM149 8-102