3) BOOM CYLINDER (1) 侍 Removal Expand the arm and bucket fully, lower the work equipment to the ground and stop the engine. Operate the control levers and pedals several times to release the remaining pressure in the hydraulic piping. 侍 侍 Loosen the breather slowly to release the pressure inside the hydraulic tank. 13031GE18 Escaping fluid under pressure can penetrate the skin causing serious injury. Fit blind plugs in the hoses after disconnecting them, to prevent dirt or dust from entering. Disconnect greasing hoses (1). Sling boom cylinder assembly. 侍 1 刮 刯 220S8DA22 到 Remove bolt (4), stopper (5) and pull out pin (2). Tie the rod with wire to prevent it from coming out.
侍 Lower the boom cylinder assembly (6) on a stand. 刱 6 21078DA24 8-129 8-129 4 5 2 4 5 2107A8DA23