hyundai — 1. PUMP DEVICE

(4) Adjustment of maximum and minimum flows The regulator can adjust the maximum and minimum flows with the adjusting screws. 808 954 刮 Adjustment of maximum flow Adjust it by loosening the hexagon nut (808) and by tightening (or loosening) the set screw (954). The maximum flow only is adjusted without changing other control characteristics. 21092MP23 Delivery flow, Q (min Pilot pressure, Pi 21092MP21 刯 Adjustment of minimum flow Adjust it by loosening the hexagon nut (806) and by tightening (or loosening) the hexagonal socket head set screw (953). Similarly to the adjustment of the maximum flow, other characteristics are not changed.

However, remember that, if tightened too much, the required horsepower during the maximum delivery pressure (or during relieving) may increase. 806 953 21092MP24 Delivery flow, Q ( min Pilot pressure, Pi 21092MP22 2-19 Adjustment of max flow ed Tightening Flow change amount of amount adjusting screw (954) -1) (Turn) (再/min) Flow change amount (再/min) 00 +1/4 -5.5 Adjustment of min flow ed Tightening Flow change amount of amount adjusting screw (953) -1) (Turn) (再/min) Flow change amount (再/min) 00 +1/4 +4.4