hyundai — 2. MAIN CONTROL VALVE

When retraction (return) On the other hand, the pressure of the pressurized oil becomes lower than set pressure of the spring, the main poppet is seated by spring force. Then the pressure of the chamber A becomes equal to the pressure of the P port and the main poppet is seated to the seat of the socket. The valve returns to the initial condition. (3) Power boost function During power boost operation, the pilot pressure for the power boost enters inside of the piston B through the hole A, the crevice passage and the side hole of the piston B. It pushes the piston to the left direction and the set pressure of the spring is increased.

Piston A Hole A Spring Piston B Socket Chamber A Housing 220S2MC42 OPERATION 3 OF MAIN RELIEF VALVE 2-53