OPERATION FRONT WINDOW When opening or closing the ceiling window, front window, bottom window, or door, always set the safety lock lever to the LOCK position. If the control levers are not locked and they are touched by accident, a serious accident may occur. When opening or closing the window at the front of the cab, stop the machine on horizontal ground, lower the work equipment completely to the ground, stop the engine, then carry out the operation. When opening the front window, hold the grip securely with both hands, pull up, and do not let go until the automatic lock catch is locked. When closing the front window, the window will move quicker under its own weight.
Hold the grips securely with both hands when closing it. Remark With single pane front window, the cab front window cannot be opened WHEN OPENING 1. Place the work equipment on flat ground and stop the engine. 2. Securely lock the safety lock lever. 3. Check to be sure the wiper blade is stored in the right stay. 4. Grip knobs (A) at the top, bottom, left, and right of the front window, and pull lock lever (B) to release the lock at the top of the front window. The top of the front window will come out. PC400LC-7E0 2-41