Komatsu — CAB EMERGENCY EXIT WINDOW

6. Check to be sure lock lever (B) is secured at the LOCK position. OPERATION The lock is engaged if the arrow on lock case (F) lines up with the arrow on lock lever (B). Check it visually. If the arrow on lock case (F) does not line up with the arrow on lock lever (B), the lock is not engaged. Repeat the operation in Step 5 to engage the lock. REMOVING FRONT BOTTOM WINDOW 1. Open the front window, then hold grip (A), pull up, and remove the bottom window. 2. After removing the bottom window, store it at the rear of the operator's cab and lock it securely with left and right locks (B). When removing, always hold the glass with one hand and release the lock with the other hand.

CAB EMERGENCY EXIT WINDOW Use the rear window and use it as an emergency escape exit. Remove the rear window as follows: A. Pull ring (1) and completely remove seal (2) from the rubber core. B. With pressure push on corner of the window, the glass will fall outside. Remark Do not remove the rear window except when using it as an emergency exit PC400LC-7E0 2-45