OPERATION SEAT BELT Before fitting the seat belt, check to be sure there is no abnormality in the belt or its mounting bracket. If it is worn or damaged, replace the seat belt. Even if the seat belt appears normal, replace it every 3 years. The date of manufacture of the belt is shown on the back of the belt. Always wear the seat belt during operations. Fit the seat belt so that it is not twisted. FASTENING AND REMOVING SEAT BELT This seat belt has a retractor, so it is not necessary to adjust the length. Fastening seat belt Hold grip (2) and pull the belt out from the retractor (1), check to be sure the belt is not twisted, then insert tongue (3) into buckle (4) securely.
Pull the belt lightly to check to be sure it is properly locked. Removing belt Press button (5) in buckle (4), and remove tongue (3) from the buckle (4). The belt is automatically spooled, hold grip (2) and return the belt slowly to the retractor (1). SYSTEM “ON” CHECKS Do not start the engine during SYSTEM “ON” CHECKS When starting the engine, check that the lock lever is securely at the LOCK position. If the lock lever is not locked securely and the control levers or control pedal are touched when the engine is started, the machine may move unexpectedly, and this may lead to serious personal injury. 1. Check safety lock lever (1) is in the LOCK position. 2.
Check the position of each lever, be sure they are in neutral. PC400LC-7E0 2-79