OPERATION GENERAL TRAVELING TRAVELING OVER OBSTACLES When traveling over obstacles such as boulders or tree stumps, the machine (in particular, the undercarriage) is subjected to a large shock. Reduce the travel speed and travel over the obstacle keeping it at the center of the tracks. Remove such obstacles if possible or avoid traveling over them. HIGH SPEED TRAVEL On uneven roadbeds such as rock beds or uneven roads with large rocks, travel at Lo speed. When traveling at high speed, set the idler in the forward direction. To switch the travel speed, press travel speed selector switch (1). The travel speed is displayed as Lo , Mi , or Hi on the monitor display.
PERMISSIBLE WATER DEPTH Remark When driving the machine out of water, if the angle of the machine exceeds 15 o , the rear of the upper structure will go under water, and water will be thrown up by the radiator fan. This may cause the fan to break. Be extremely careful when driving the machine out of water. Do not drive the machine in water deeper than the center of carrier roller (1). Grease the parts which have been under water for a long time until the used grease is projected out of the bearings (around the bucket pin, in particular). 2-100 PC400LC-7E0