OPERATION If the work equipment is used with the cylinder rod operated to its stroke end, and impact by some external force is applied, the hydraulic cylinders will be damaged and may causing personal injury. Avoid operations with the hydraulic cylinder fully retracted or fully extended. Do not use the dropping force of the machine for digging, or use the dropping force of the bucket as a pickaxe, breaker, or pile driver. This will drastically reduce the life of the machine or could possibly cause injury to the operator. Do not use the dropping force of the machine for digging or pulling materials from a high level.
Damage to the machine or injury to the operator may result from falling material. DIGGING HARD ROCKY GROUND Do not attempt to directly excavate hard rocky ground with the work equipment. It is better to excavate it after breaking it up by some other means. This will not only save the machine from damage but will make for better economy. SUDDEN LEVER SHIFTING HIGH SPEED TRAVEL Never carry out sudden lever shifting, this may cause sudden starting. Avoid sudden lever shifting from forward (A) to reverse (B) (or from reverse (B) to forward (A) snapping). Avoid sudden lever shifting change such as sudden stopping from near top speed (lever release operation). 2-110 PC400LC-7E0