Komatsu — RECOMMENDED PRODUCTS OTHER THAN KOMATSU GENUINE OILS

MAINTENANCE Fuel tank Specified capacity 650 171.73 Refill capacity - - Always Use Diesel Oil For The Fuel . To ensure good fuel consumption characteristics and exhaust gas characteristics, the engine mounted on this machine uses an electronically controlled high-pressure fuel injection device. This device requires high precision parts and lubrication, so if low viscosity fuel with low lubricating ability is used, the durability may drop markedly. Note 1: SAE0W30EOS and SAE5W40EOS must be fully synthetic and HTHS (High-Temperature High-Shear Viscosity 150°C) must be equal to or higher than 3.5 cP. Komatsu EOS0W30 and EOS5W40 are the most suitable oils.

If these oils are not available, contact your Komatsu distributor. Note 2 : Power train oil has different properties from engine oil. Be sure to use the recommended oils. Note 3 : Hyper white grease (G2-TE) has a high performance. When it is necessary to improve the lubricating ability of the grease in order to prevent squeaking of pins and bushings, the use of G2-TE is recommended. Note 4 : Supercoolant (AF-NAC) 1. The coolant has the important function of preventing corrosion as well as preventing freezing. Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC).

Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 2 years or 4000 hours. Komatsu Supercoolant (AF-NAC) is strongly recommended wherever available. 2. For details of the ratio when diluting super coolant with water, see See “” on page 3-25. When the machine is shipped from the factory, it may be filled with coolant containing 30% or more Supercoolant (AF-NAC). In this case, no adjustment is needed for temperatures down to -10°C (14°F). (never dilute with water). 3. To maintain the anticorrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant between 30% and 68%.

RECOMMENDED PRODUCTS OTHER THAN KOMATSU GENUINE OILS When using commercially available oils other than Komatsu genuine oil, or when checking the latest specifications, refer to the Komatsu web page or consult your Komatsu distributor. 3-12 PC400LC-7E0 Engine oil pan Swing machinery case Final drive case (each) Damper case Hydraulic system Cooling system liter 42 13.4 12 1.07 472 36 US gal 11.10 3.54 3.17 0.28 124.70 9.51 liter 38 13.4 12 - 248 - US gal 10.04 3.54 3.17 - 65.2 -