MAINTENANCE PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS To ensure safety at all times, the machine must have periodic maintenance. To further improve safety, the parts listed in the table below should be replaced on a consistent basis. These parts are closely related to safety and fire prevention. The material of these parts change as time passes, or they easily wear or deteriorate. Because it is difficult to judge the condi- tion of the parts simply by periodic inspection, they should be replaced after a specified period of time regardless of their appearance. This is necessary to ensure that they maintain their function completely.
However, if these parts show any abnormality before the replacement interval has passed, they should be repaired or replaced immediately. If the hose clamps show any deterioration, such as deformation or cracking, replace the clamps at the same as the hoses. When replacing the hoses, replace the O-rings, gaskets, and other such parts at the same time. Ask your Komatsu distributor to replace the safety critical parts. 3-14 PC400LC-7E0