Komatsu — BREAKER CIRCUIT ADDITIONAL OIL FILTER

OPTIONS, ATTACHMENTS LOCK PIN This pin (4) locks the control pedal. Position (a): Locked Position (b): Only front of pedal can be operated to full position (rear is locked) Position (c): Both front and rear of pedal can be operated to full position When not using the attachment, set the lock pin to position (a). When using a breaker, select B mode on the monitor and set the lock pin to position (b). When using a Crasher, select P or E mode on the monitor and set the lock pin to position (c).

Remark When using a breaker, if the lock pin is set to position (c) and the rear portion (B) of the pedal is depressed, it will cause defective operation or breakage of the breaker, so always set the lock pin to position (b) when using the breaker. BREAKER CIRCUIT ADDITIONAL OIL FILTER This filter (5) prevents deterioration of the hydraulic oil when using a breaker. Oil only flows when B mode is selected on the monitor. Remark Always install an additional filter in the return circuit on machines equipped with a hydraulic breaker. PC400LC-7E0 5-7