Komatsu — COMBINATIONS OF WORK EQUIPMENT

OPTIONS, ATTACHMENTS ATTACHMENT GUIDE Please read the instruction manual for the attachment and the sections of this manual related to attach- ments and options. When installing any attachment or option, there may be safety issues to review, so please contact your Komatsu distributor before installing. Installing attachments or options without consulting your Komatsu distributor may not only cause safety problems, but may also have an adverse effect on machine operation and the life of the equipment. Any injuries, accidents, or damage resulting from the use of unauthorized attachments or options will not be the responsibility of Komatsu.

COMBINATIONS OF WORK EQUIPMENT Depending on the type or combination of work equipment, there is a danger that the work equipment may hit the cab or machine body. When using unfamiliar work equipment for the first time, check before starting if there is any danger of interference, and operate with caution. This table lists the combination of attachments which can be installed to the long arm (standard), short arm and extension arm. : Can be used : Can be used only for light-duty work : Cannot be used Remark When the extension arm is equipped, if the bucket is drawn to the machine body, the arm interferes with the body. Operate the extension arm carefully.

When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage. Operate the boom carefully. Categories of use For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high durability and high wear resistance be employed. 5-18 PC400LC-7E0 -For general digging : Digging or loading sand, gravel, clay etc. -For light duty digging : Digging or loading dry, loose earth and sand, mud etc. -For loading work : Loading dry, loose earth and sand