Komatsu — SELECTING SHOES

OPTIONS, ATTACHMENTS SELECTION OF TRACK SHOES Select suitable track shoes to match the operating conditions. SELECTING SHOES Confirm the category from the list of uses in Table 1, then use Table 2 to select the shoe. Categories B and C are wide shoes, so there are limitations on their use. When using these shoes, check the precautions, then investigate the conditions of use to confirm that these shoes are suitable. When selecting the shoe width, select the narrowest shoe possible that will give the required flotation and ground pressure.

If a wider shoe than necessary is used, the load on the track will increase, and this will cause the shoes to bend, links to crack, pins to break, shoe bolts to come loose, and various other problems. Table 1 Table 2 5-20 PC400LC-7E0 Category Use Precautions when using A Rocky ground, riverbeds, normal soil ● On rough ground with large obstacles such as boulders or fallen trees, travel at low speed. B Normal soil, soft ground ● These shoes cannot be used on rough ground where there are large obstacles such as boulders or fallen trees. ● Travel at Hi or Mi speed only on flat ground, and if it is impossible to avoid going over obstacles, shift down and travel at half speed in Lo.

C Paved road ● Take note of low gradeability due to the flat shoes and exercise due care. PC400LC-7EO Specifications Category Standard 700 mm Triple B Optional 600 mm Triple A Optional 800 mm Triple B Optional 700 mm Flat C