OPERATION INPUT CONFIRMATION SWITCH Press this switch (11) to confirm the selected mode when in the maintenance mode, brightness/contrast adjustment mode, or select mode. LIQUID CRYSTAL ADJUSTMENT SWITCH Press switch (12) to adjust the brightness or contrast of the display monitor. ADJUSTING BRIGHTNESS 1. When monitor adjustment switch (12) is pressed, the monitor display screen changes to the brightness/contrast screen shown in the diagram on the right. 2. Use the brightness/contrast screen and press up switch (9) or down switch (10) to select brightness of the monitor. (The selected monitor is inverted to black.) 3.
When the screen changes to the brightness adjustment screen, press up switch (9) or down switch (10) to adjust the brightness. 4. After completing adjustment of the brightness, press input confirmation switch (11). 2-30 PC400LC-7E0