Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION ADJUSTMENT ADJUSTING OPERATOR'S SEAT WARNING (C) Adjust reclining angle 3 - 84 Adjust the seat posi tion at the beginning of each shi ft or when operators change . Adjust seat so the b rake pedal can be completely de pressed with t he operator's back against the backr (A) Fore-and-aft adj ustment Pull lever (1), set the seat to a position where it is easy to operate, then release the lev er. 200 mm (7.9 in) (10 stages) Fore-aft adjustment: 200 mm (7.9 in) (10 stages) (B) Weight and heig ht adjustment of seat Turn knob (2) und er the seat so that weight adju stment indicator (3) displays the g turning the knob ( reen range.

The height can be adjusted 2) while the green range is di Turn the knob cl counterclockwise Height adjustment r Weight adjustment r ange: 50 to 130 kg (110 to 23 REMARK When the seat is pus hed forward, the available re clining angle becomes greater; when the seat i s pushed back, the available reclining a ngle becomes smaller. Whe n moving the backres t, return the backrest to its original position before moving the s eat. Pull up lever (4), set the seatback to a position w here it is easy to operate, then release the lev (D) Adjusting directi on of seat Pull up lever (5) to u nlock the seat. The seat can t hen be turned 15 ° to the right.

After changing the di rection of the seat, return the lever securel y to lock the seat. Change the direc tion of the seat to the right for the ease of pper. operation of the ri REMARK If the direction of the seat is changed, the steering , directional, a nd gearshift lever is als o interconnected and change s direction.