. OPERATION OPERATION STARTING ENGINE NORMAL STARTING WARNING control dial (1) to the center position between MIN 3 - 91 Check tha t there are no persons or ob stacles i n the su rround ing area, then sound the horn and s Never use starting aid f luids as they m ay caus e explosions. Exhaust g as is toxic. W hen starting th e engine in confined sp aces, be particularly careful to ensu NOTICE Do not cr If the eng ank the starting motor continuously for more than 20 seconds. ine does not start, wait for at least 2 minutes, then repeat the procedur Before st idling (MI On this m e from Step 2. arting the engi N) position.
achine, to prot ne, check that the fuel control dial is in the low ect the turbocharger, a turbo protect function is provided. immediat In cold we ely after startin ather, even if g the engine, t fuel co he engin ntrol di e speed al (1) may n is moved ot change for severa l seconds. If the fuel control dial is in the FULL po sition, t he engin e will a ccelerate suddenly and cause d amage to the engine parts, so set it to an intermedi ate or low spe ed position. 1. and MA 2. Insert t he key into st arting switch (2) and turn th e key t o the ON positio n (B).