Komatsu — METHOD OF TOWING MACHINE

. OPERATION TROUBLESHOOTING OPERATION TROUBLESHOOTING (approx. 50 times) until the priming pump and the overflow valve release sound 9. Push in the knob of priming pump (2) and tighten it. METHOD OF TOWING MACHINE WARNING 3 - 142 8. (2) becomes st becomes contin 10. Tur n the key in t he starting switch t o the START position and Wh en doing this, do not crank the st arting motor continuously for more than 20 seconds . If the engine does no star t, wait for at l east 2 minutes, th en try again. Perform this operation a maximum of 11. If th e engine doe s not start, repeat the operation from St ep 1.

B e su re to use a wir e rope sufficiently str ong for the tow ing weig When using the tow ing hook, be sure to S et th e wire rope lev el and align it with th T ow t he machine sl If t he m achine sink s in mud and can not get out u nder its own power, or if being u sed to tow a heav y object, fit th e wire t o the towing h ook as show n in the diagram o n the right, or in the ca se of machin es with a drawbar, fit the wire to the drawbar pin when when towing. NOTICE The max. allowable dra wbar pull of this mac hine is 367,750 N (37,50 0 kg). Do not at tempt to pull anything beyond this limit.