Komatsu — RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL

. MAINTENANCE RECOMMENDED FUEL, COOLANT, AND LUBRICANT MAINTENANCE RECOMMENDED FUEL, COOLANT, AND LUBRICANT NOTICE Use only diesel fuel. The engine mounted on this machine employs electronic control and a high-pressure fuel injection device to obtain good fuel consumption and good exhaust gas characteristics. For this reason, it requires high precision for the parts and good lubrication. If kerosene or other fuel with low lubricating ability is used, there will be a big drop in durability. Note 1: SAE0W30EOS and SAE5W40EOS must be fully synthetic and HTHS ( High-Temperature High-Shear Viscosity 150 ° C) must be equal to or higher than 3.5 cP.

Komatsu EOS0W30 and EOS5W40 are the most suitable oils. If these oils are not available, follow the instruction "RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL (PAGE 4-12)" at the end of this chapter. Note 2: Powertrain oil has different properties from engine oil. Be sure to use the recommended oils. Note 3: Hyper grease (G2-T, G2-TE) has a high performance. When it is necessary to improve the lubricating ability of the grease in order to prevent squeaking of pins and bushings, the use of G2-T or G2-TE is recommended. Note 4: Supercoolant (AF-NAC) 1) Coolant has the important function of anticorrosion as well as antifreeze.

Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion,antifreeze and cooling propertiesand can be used continuously for 2 years or 4000 hours. Komatsu Supercoolant (AF-NAC) is strongly recommended wherever available. 2) For details of the ratio when diluting super coolant with water, see "CLEAN INSIDE OF COOLING SYSTEM (PAGE 4-20)". When the machine is shipped from the factory, it may be filled with coolant containing 30% or more Supercoolant (AF-NAC).

In this case, no adjustment is needed for temperatures down to -10 ° C (14 ° F). (never dilute with water) 3) To maintain the anticorrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant between 30% and 68%. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL When using commercially available oils other than Komatsu genuine oil, consult your Komatsu distributor. 4 - 12 Engine oil pan Power train oil pan (incl.

transmission, torque converter and bevel gear casses) Damper case Final drive case (each) Hydraulic system Fuel tank Cooling system Main circuit Sub circuit Specified amount liter 55 150 1.5 40 270 840 110 20 US gal 14.53 39.63 0.40 10.57 71.33 221.93 29.06 5.28 Refil capacity liter 50 90 1.5 40 130 - - - US gal 13.21 23.78 0.40 10.57 34.35 - - -