. MAINTENANCE SERVICE PROCEDURE WHEN LOOSENING TENSION WARNING WHEN REMOVING TRACK WARNING 4 - 31 It is extremel y dangerous to release the grease by any m ethod except the If track tensio n is not relieved by th is procedure, contac t your Komatsu d 1. Remov e both bolts (1), then remove cover (2). NOTICE When rem oving cover (2), be car eful not to let any dir t get inside. There is a safety label stuck to t he back of cover (2). Be careful not to 2. Loosen 3. Turn pl plug (4) gradually to ug (4) a maximum of release the grease. one turn. 4. If the gr ease does not come out smoothly, move the machine backwa 5. Tighten rds and forwards a short distance. plug (4). 6.
To chec k that the correct tension has been achieved, move the machin 7. Check t e backwards and for he track tension aga wards. in, and if the tension is not correct adjust it again. Depending o n the situation, the ope ration to remove the track may be extremely dangerous. Beforeremov ing the track,if the pro cedure "WHENLOOS ENING TENSION (PAGE4-31)" does not loosen the track tension, contact your Komats u distributor for repair s.