Komatsu — CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE

. MAINTENANCE SERVICE PROCEDURE EVERY 500 HOURS SERVICE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING the front of the container directly (2) slowly to much that the Nm (7 ± 1 ± 7.2 lbft) 14.7 Nm (6.5 ± 1. ± 10.8 lbft) metal particles or packing surface oil through oil 4 - 55 Maintenance for eve ry 250 hours should be perfo rmed at the sam (including engine by- pass filter cartridge) The oil is at high tempe rature after the engine has been operated, so never change the oil immediately a fter finishing operations. Wait for the oil to cool down before changing it. Refill capacity: 50 Prepare a socket 1.

Remove the co machine and on vers at the bottom left at t the side face, and put a c tch the drained oil. lug (1) and loosen drain val underneath to ca 2. Remove drain p avoid getting oil on yourself, and drain the oil. Take care not to loosen drain valve (2) so stopper pin in the valve is distorted. Tightening torque for drain plug (1) : 68.6 ± 9 kgm, 50. Tightening torque for drain valve (2): 63.7 ± 1 5 kgm, 4 3. Check the drained oil, if there is excessive m avoid getting oil on yourself, and drain the oil. Take care not t stopper pin in the 3. foreign material, contact your Komatsu distrib 4. Tighten drain val ve (2), then tighten plug (1). 5.

Using the filter w rench, turn engine oil filter ca left and remove i 6. Clean the filter ho lder, fill the new filter cartridg coat the packing surface and thread with eng thinly with greas e), then install the filter cartrid 7. When installing t into contact with he filter cartridge, bring the the filter holder, then tighten 8. turn. After replacing t filler port (F) until the oil level is between the H the dipstick.