. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC OIL FILTER ELEMENT, CLEAN HYDRAULIC TANK STRAINER WARNING ground securely, oil filler (F) to release the 4 - 70 EVERY 2000 HOURS SERVICE Maintenance for every 250, 500 and 1000 hour s service s hould be carried out at the sa The oil is at hig h temperature immediat ely after the machine h as been operated. Wait for the oil to cool down before ch anging the oil. When removing the oil filler cap (F), tur n it slowly t o release th e internal pressure, then remove Refill capacity : 130 liters (34.35 US 1. engine and slowly turn the cap stop the 2. the drain valve ( 2).
After draining the oil, tighten drain plug (1) and drain valve ( 2). When loosening d rain valve (1), b e careful not to get oil on 3. Remove bol element. ts (3), then remove cover (4) and take out the take out the 4. Clean the in element. side of case and removed parts and install a new