Komatsu — CONTROL LEVERS, PEDALS

. OPERATION EXPLANATION OF COMPONENTS JOYSTICK (STEERING, DIRECTIONAL AND GEAR SHIFT LEVER) (PCCS lever) This lever (2) is used to switch between forward and reverse, to steer the machine, or carry out counterrotation turns. REMARK PCCS: Palm command control system Forward-reverse shifting Position (a): FORWARD Position (b): REVERSE Position N: Neutral Move to the front to drive forward; move to the rear to drive in reverse. right to turn the machine. The 3 - 41 t or rear, operate the lever partially to the left or r same direction as the lever is operated. ft or right, the machine will turn in a small radius.

he machine will turn gradually in the same direction as the lever is operated If t he lever is moved fully to the le ft or right, the machine will turn in a small REMARK When moving the joystick lever, and the lever is released, it will return to (a) or (b) and the mac hine wi ll trav el in straight line. and gearshift lever is at the n and switch (c) or switch (d) is will change. tch is pressed, the transmission eed. the switch is pressed, the ill shift down one speed. eed in each speed range, see . FORWARD or REVERSE positio pushed, the transmission speed UP switch (c): Each time the swi will shift up one sp DOWN switch (d):

Each time transmission w For details of the maximum sp Fo "SPECIFICATIONS (PAGE 5-2)" REMARK When the transmission is shift ed, the speed range being used is displayed on th e display pa nel on the m onito panel. Example: display panel. ed on the display panel. d on the display panel. ed, P is displayed. Neutral: N is displayed on the FORWARD 2nd: F2 is display REVERSE 3rd: R3 is displaye When the parking lever is lock For details of the gearshift op eration using the shift mode, see "SHIFTING GEA R (PAGE 3- 101)". Shift mod selection means the operation to set the selected speed range beforehand in th e N position.