Kenworth — Kenworth T170 T270 T370 and Hybrid 2011 Body Builders Manual

Section 6 Body Mounting Rear Body Mount When U–bolts are used to mount a body we recommend that the last body attachment be made with a “fishplate” bracket. See Figure 6–9. This provides a firm attaching point and helps prevent any relative fore or aft movement between the body and frame. Refer to Figure 6-6 for mounting hole location guidelines. Body Structure Frame Rail FIGURE 6-9. Example of Fishplate Bracket at Rear End of Body, used with U-Bolts Hybrid Clearances Hybrid PEC Zone C Figure 6-10: Clearance zones around Hybrid Power Electronics Carrier (PEC) HAZARDOUS VOLTAGE: To reduce the risk of possible serious injury (Shock, Burn or Death):

Components marked with High Voltage should be avoided. Service must be performed by qualified personnel only. 6-6 12/11 Zone A Zone B Z