Kenworth — Kenworth T170 T270 T370 and Hybrid 2011 Body Builders Manual

Section 8 Electrical Data Bus Communication The multiplexed instrumentation system uses several different data links to transmit input/output data from other systems to the Cab Electronic Control Unit (CECU), and ultimately to the Central Instrument Cluster and CVSG Gauges. See Figure 8-4, Multiplexed Instrumentation Block Diagram on page 8-3. POWER TRAIN CONTROLLERS I-CAN FIREWALL CECU 3 V-CAN DWIM ELECTRONIC CVSGs CSVG BUS ELECTRIC SWITCHES (SOME) FIGURE 8-4. Multiplexed Instrumentation Block Diagram. V-CAN = Vehicle Controller Area Network The V-CAN, also referred to as the J1939, is used to transmit data between the transmission, ABS system, engine, etc.

to the Cab Electronic Control Unit (CECU). I-CAN = Instrumentation Controller Area Network The I-CAN provides data link communication from the Cab Electronic Control Unit (CECU) to the Central Instrument Cluster. CVSG Bus The CVSG bus is a private data bus used to transmit data from the Cab Electronic Control Unit (CECU) to the individual 2-inch gauges. A series of “daisy chained” jumper harnesses link each gauge to another. 8-3 12/11