Kenworth — Kenworth T170 T270 T370 and Hybrid 2011 Body Builders Manual

Section 8 Electrical TELLTALE SYMBOLS Kenworth’s interior allows Body Builders to customize the dash telltale symbols (warning lights). The editable telltale symbols are located on removable cards inside the baseline cluster. This section will describe how to replace and insert editable cards, as well as how to activate the telltale lights. Note the numbers 1 – 12 on Figure 8-11. These are how the positions are identified in Table 8-1 and on the instrument panel harness breakouts for the “editable” telltales behind the right hand cluster. To remove the editable cards follow steps 1-3 in the instructions for accessing gauges and switches (page 8-10). The access cards have a positive lock.

To remove the card push inwards on the lock with your thumb and pull the card out with pliers. Figure 8-11 below details the cards. To reinstall a card slide it in either by hand or with pliers. LOCK LOCK Left Right FIGURE 8-11. Telltale Symbol Standard Cards The numbers 1–12 on Figure 8-11. These are how the positions are identified in Table 8-1 and on the instrument panel breakouts for the “editable” telltales behind the right hand cluster. Note: 8-14 12/11