Kenworth — Kenworth T170 T270 T370 and Hybrid 2011 Body Builders Manual

Section 8 Electrical ALARMS There are three spare Alarm female ј” slide connector breakouts behind the speedo-tach cluster near the speedo-tach connector labeled: Alarm 1A Alarm 1B Alarm 2 When these circuits are either grounded or powered an alarm sound in the dash will turn on. Alarm 1 and Alarm 2 have two different tones. SPARE SWITCHES FACTORY INSTALLED Kenworth provides the option of coding for up to 3 spare switches with standard fuse locations in the central electrical panel. These switches receive power from the Accessory bus. Switches 1 – 3 are fused by separate 15A circuit protection devices (fuse or circuit breaker).

The location of these circuit protection devices are labeled on the central electrical panel cover. For example “SPARE ACC SWITCH #1” is the label for spare switch #1. FIGURE 8-14. Spare switches wired to Power. Sales Codes: 8208495 (2 spare), 8208496 (3 spare). Location: LH Rail Approx. 400mm back of cab. Table 8-2. Chassis Harness. * Fuses F32 and F33 require “Spare Accessory” relay K5. ** Spare Switches are located in dash area 4 and use a lighted rocker switch P27-1127-031 *** Spare Switches are wired to 6-way Packard connector on LH Frame rail Back of Cab near 9-way Trailer/body connector. Fuse F15, F32 and F33 will accept an optional Polyswitch for circuit protection.

8-19 12/11 Fuse Fuse size Buss Fuse Description Switch Connector Description** Chassis Connector Description*** Chassis Connector Terminal F15 15A ACC Spare ACC Switch 1 J07, Spare ACC SW#1 P764, Spare Circuits D F33* 15A Spare ACC Spare ACC Switch 2 J08, Spare ACC SW#2 P764, Spare Circuits E F32* 15A Spare ACC Spare ACC Switch 3 J12, Spare ACC SW#3 P764, Spare Circuits F