Section 8 Electrical ELECTRICAL WIRE NUMBER AND COLOR GENERAL WIRE LABELS Kenworth introduced a new electrical wire numbering system in 2007. This wire number system uses only 10 different colors and only one striped wire color. These colors determine a circuits FUNCTION as follows: Each wire has at a minimum a 7 character label, the first three characters are the circuits color as listed above, the re- maining four are numerical which relate to the load the wire services. See Table 8-12 for the general categories. TABLE 8-12. Wire Number General Categories To identify similarly labeled wires a suffix can be added. For example:
YEL2950-1 would be a yellow wire indicating it is activated power. The 2950 indicates the load, in this case fog lamps, the -1 is a suffix used to differentiate similarly labeled circuit. 8-38 12/11 R/W Direct Battery Power RED Protected Battery Power ORG IGN/ACC/Start Power YEL Activated Power BRN Indicator Illumination, Backlighting BLK Load Return GRY Control VIO Reference Voltage BLU Sensor Signal GRN Sensor common not connected to GND WHT Ground