Section 3 Dimensions REAR SUSPENSION LAYOUTS The rear suspension layouts are provided as a tool to help layout bodies prior to arrival. The applicable dimensions are shown. Be sure to check the axle spacing that is shown, as alternate spacings may exist and could change some of the dimensions. The dimensions shown below are the most typical installations, in special cases some hole locations will move. If you are planning on using the holes shown for your body installation, please confirm with your local KW dealer that the drawing below will be the installation used on your specific truck. Ensure that proper torque is used to reinstall any suspension components.
See Table 7-1 and 7-2 on page 7-7. It would be recommended to order the frame layout of your chassis along with your truck order. This can be done on any Kenworth truck, and will be provided 4 weeks ahead of the build schedule. If there are hole locations that are not detailed please work with your local Kenworth Dealer to request that information. If you would like details on the frame drilling with optional spacings, please contact your local Kenworth dealer. Kenworth AG210L Single Rear Axle Table 3-14. Optional Kenworth Single Suspension 3-19 12/11 Rating Axle Spacing Laden Ride Height Unladen Ride Height Kenworth AG210L 21K – 6. 5” 6. 5”