Kenworth — Kenworth T170 T270 T370 and Hybrid 2011 Body Builders Manual

Section 4 Exhaust & Aftertreatment Exhaust and After-treatment Information The following section is designed to give you information regarding the exhaust and after-treatment systems on Kenworth chassis. All Kenworth’s equipped with 2010 emission level engines will utilize Selective Catalyst Reduction (SCR). SCR is a process in which Diesel Exhaust Fluid (DEF) is injected into the exhaust down stream of the engine. DEF is converted to ammonia by the heat of the exhaust system. Inside of the SCR canister a catalyst causes a chemical reaction to occur between the ammonia and NOx, turning it into water and nitrogen.

For more information on the specific details of how SCR works, please contact your local Kenworth dealer. DEF System Schematic: On most Kenworth chassis the DEF Supply Module (or pump) is integrated into the DEF tank. Kenworth does not allow relocation of this pump. The following schematic details how the DEF lines route to the after-treatment system. DEF Tank (10-gallon shown) DEF Return Line (Backflow from Supply Module) DEF Draw Line (Inlet to Supply Module) See Detail A Coolant Draw (from Draw Tee) Coolant Return (to Coolant Valve) Detail A Scale 1:2 DEF Return Line (Backflow) DEF Draw Line (Inlet) DEF Supply Module (Pump) DEF Pressure Line (Outlet) DEF Dosing Module (Injector) 4-1 12/11