OPERATION LISTENING TO RADIO Turn the ignition switch ON, then turn power switch (1) ON. Use band selector button (2) to select MW (AM), FM1 or FM2. Select the station with the preset buttons (3). Remark In case you do not remember the number assigned to a certain preset station, press auto-store/preset scan button (4) for less than 0.5 second. The preset six stations will broadcast one after another for five seconds each. When the desired station comes around, press the button again and scan tuning stops there. If you want to tune in to a station that is not preset, use either seek tuning button (5) or manual tuning button (6). Adjust the volume, balance, and tone as desired.
When turning the radio OFF, turn power switch (1) to the left until there is a click. Remark To switch to the radio when listening to a cassette, press the cassette eject button to stop the tape. If you insert a cassette when listening to the radio, the tape will start to play. LISTENING TO CASSETTE TAPE Turn the ignition switch ON, then turn power switch (1) ON. Set the cassette with the exposed portion of the tape on the right side and push it into the cassette door. The tape will automatically start playing. If the arrow indicating the direction of play is pointing to the right, the top side is being played; if the arrow is pointing to the left, the bottom side is being played.
When the tape reaches the end, it is automatically reversed and the other side starts to play. When finishing with the tape, press the cassette eject button to eject the tape and automatically switch to the radio. REVERSING TAPE When listening to the tape, press both FAST FORWARD, REWIND buttons (A) and (B) at the same time lightly. When this is done, the tape direction display will be reversed. WA320PT-5L 2-49