Komatsu — FUELS

MAINTENANCE FUEL SPECIFICATIONS When purchasing fuels, coolants to lubricants it is important to follow the recommendations set forth by Komatsu . Using non recommended fuels, lubricants or coolants may damage the machine or reduce the machines efficiency. FUELS Use only diesel fuel No 2 Fuel Specification: ASTM D975 When fuel sulphur content is less than 0.5%, change oil in the oil pan according to the periodic maintenance hours described in this manual. Change oil according to the following table if fuel sulphur content is above 0.5%.

When starting the engine with an atmospheric temperature of lower than 0ЧС (32ЧF), be sure to use engine oil of SAE10W, SAE10W-30 and SAE15W-40, even though the atmospheric temperature goes up to 10ЧС (50ЧF) more or less during the day. Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half. There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 15W-40), but be sure to add single grade oil that matches the temperature range in the table. We recommend Komatsu genuine oil which has been specifically formulated and approved for use in engine and hydraulic work equipment applications. Specified capacity:

Total amount of oil including oil for components and oil in piping. Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance. ASTM: American Society of Testing and Material SAE: Society of Automotive Engineers API: American Petroleum Institute 3-8 WA320PT-5L Fuel sulphur content Charge interval 0.5 to 1.0% 1/2 of regular interval Above 1.0% 1/4 of regular interval