Komatsu — INFLATION OF TIRES

MAINTENANCE SELECTION AND INSPECTION OF TIRES If a tire or a rim is handled incorrectly, the tire may burst or may be damaged and the rim causing serious injury or death. Since maintenance, disassembly, repair and assembly of the tires and rims require special equipment and skill, be sure to have a tire repair shop to carry out the work. Do not heat or weld the rim to which the tire is installed. SELECTION OF TIRES Select the tires according to the conditions of use and the weight of the attachments on the machine. Use only specified tires and inflate them to the specified pressure. Select the tires according to the conditions of use and the weight of the attachments of the machine.

Use the following table. Since the travel speed indicated on the speedometer varies with the tire size, consult your Komatsu Dealer when using optional tires. When inflating a tire, check to be sure no one will enter the working area. Use an air chuck which has a clip and which can be fixed to the air valve. While inflating the tire, check the inflation pressure occasionally so that it will not rise too high. If the rim does not fit normally, it may fail while the tire is inflated. To ensure safety, place a guard around the tire and do not work in front of the rim side of the tire. Be sure to observe the inflation pressure.

Do not adjust the inflation pressure of the tires just after high-speed travel or heavy-duty work. Measure the inflation pressure with a tire pressure gauge while the tires are cool before starting work. INFLATION OF TIRES Adjust the inflation pressure properly. When inflating a tire, use an air chuck which can be fixed to the air valve of the tire as shown in the figure. Do not work in front of the rim but work on the tread side of the tire. The proper inflation pressure is shown below. WA320PT-5L 3-27 Maximum load [kg (lb)] Tire size Standard Front and Rear 6,775 (14939) 20.5-25-12PR Tire Size Inflation Pressure Standard 20.5-25-12PR Front tire:

0.32 MPa (3.3 kgf/cm , 46.9 PSI) 2 Rear tire: 0.27 MPa (2.8 kgf/cm, 39.8 PSI) 2