MAINTENANCE CHECKING PARKING BRAKE 1. On dry downhill slopes, use the brake pedal to stop the machine. 2. Pull the parking brake lever fully to the LOCK position, and check if the parking brake can hold the machine in position. 3. If any abnormality is found, please contact your Komatsu Dealer. CHECKING V-BELT TENSION/ADJUST 1. Open the engine side cover on the left side of the chassis. 2. Standard deflection between air conditioner compressor pulley (1) and fan pulley (2) when pressed with a thumb approx. 98 N 10 kg should be approx. 9.5 to 13.5 mm (0.4 to 0.5 in). When a belt tension gauge is used, the standard tension is within a range of 353 to 549 N (36 to 54 kgf).
INSPECTION Check each pulley for damage, wear in the V-groove, and wear of the V- belt. In particular, be sure to check that the V-belt is not touching the bottom of the V-groove. In case any of the following occurs, ask the Komatsu Dealer in your territory to replace the belts with new ones. The fan belt has elongated, leaving little allowance for adjustment. A cut or crack is found on the belt. Slipping or creaking sound is heard coming from the belt. When the new V-belt is set, readjust it after one hour of operation. CHECK WHEN CHANGING THE V-BELT The standard deflection between the air conditioner compressor pulley and fan pulley when pressed with a thumb (approx.
98 N) should be approx. 7 to 10 mm (0.28 to 0.4 in). When a belt tension gauge is used, the standard tension is within a range of 533 to 745 N. ADJUSTING 1. Open the engine side cover on the right side of the machine. 2. When adjusting, loosen 4 bolts (1), turn 2 adjustment bolts (2), and move bracket (3) and the compressor as one unit. 3. After adjusting, tighten bolt (1) and the locknut of bolt (2). WA320PT-5L 3-33