MAINTENANCE ADDITIONAL SERVICE TIPS Occasionally you may run into items that may need servicing out of the normal service hour times. Outlined are several items to be aware of when servicing the machine. HANDLING CAB WIPER When angling the wiper arm (1) to the front, check that the wiper blade is hanging free. PREVENTING DAMAGE TO WIPER ARM BRACKET When angling the wiper arm (1) to the front, to wipe the glass clean, if the wiper arm (1) is angled with the wiper blade (2) locked to the arm (the bottom of the blade is caught on the arm), abnormal force is brought to bear on the mounting bracket and the bracket may break.
ENGINE STARTING PROBLEMS WHEN ENGINE CAN BE USED If the transmission and steering wheel can be operated, and the engine is running, it is possible to tow the machine out of mud or to move it for a short distance to the edge of the road. The operator should sit on the machine being towed and operate the steering in the direction that the machine is towed. WHEN ENGINE CANNOT BE USED When towing a machine with the engine off, use the following procedure. 1. The transfer oil does not lubricate the system, so remove the front and rear drive shafts. If necessary, block the tires to pre vent the machine from moving. 2. The steering cannot be operated, so remove the steering cylinder. 3.
Even if the brakes are in good condition, the brakes can only be used a limited number of times. There is no change in the operating force for the brake pedal, but the braking force is reduced each time the pedal is depressed. 4. Connect the towing equipment securely. When carrying out towing operations, use two machines of at least the same class as the machine being towed. Connect one machine each to the front and rear of the machine being towed, then remove the blocks from the tires and tow the machine. WA320PT-5L 3-49