PARKING BRAKE REMINDER LAMP OPERATION Lamp (2) alerts the operator if the parking brake is not set and the engine is off. During operation if the if the engine is shut down and the parking brake is not set the parking brake reminder lamp, as well as the central warning lamp should light up along with the alarm buzzer. During checks before starting (ignition switch in the “ON” position, engine stopped) the lamps should be illuminated, and when the engine is running, these lamps should go out. HST OIL TEMPERATURE CAUTION LAMP Lamp (3) alerts the operator that the HST oil temperature has risen above the specified set value.
During operation if the HST oil temperature lamp, as well as the central warning lamp should light up and the alarm buzzer sounds, stop the machine until the system cools down. At that point the lamps should go out and the buzzer should stop. During checks before starting (ignition switch in the “ON” position, engine stopped) the lamps will not be illuminated. COOLANT TEMPERATURE CAUTION LAMP Lamp (4) alerts the operator that the engine coolant temperature has risen above the specified set value. During operation if the engine coolant temperature lamp, as well as the central warning lamp should light up and the alarm buzzer sounds, shut the engine down until the engine cools down.
At that point the lamps should go out and the buzzer should stop once engine is started back up. During checks before starting (ignition switch in the “ON” position, engine stopped) the lamps should be illuminated, and when the engine is running, these lamps should go out. FUEL LEVEL CAUTION LAMP Lamp (5) alerts the operator that the fuel in the tank is below 31 liters (8.19 gal). Add fuel as soon as possible. WA320PT-5L 2-9