ENGINE OIL LEVEL ALERT LAMP OPERATION Lamp (2) alerts the operator that the engine oil level is low and needs immediate attention. During operation if the engine oil level lamp should come on shut the machine down immediately and have it serviced. During checks before starting (ignition switch in the “ON” position, engine stopped) the lamp will only light when the oil level is low. MAINTENANCE ALERT LAMP Lamp (3) alerts the operator that it is time for an oil change on the machine, this lamp flashes or lights for approximately 30 seconds after the completion of the system check when the ignition key is turned to the “ON” position.
Remark The maintenance alert lamp flashes when there is less than 30 hours left to the replacement time and after the replacement time period has passed. HST OIL FILTER CLOG ALERT LAMP Lamp (4) alerts the operator that the HST oil filter is clogged and needs immediate attention. During operation if the HST filter clog alert lamp should come on do not continue to operate the machine take the machine to a service location and have it serviced immediately. During checks before starting (ignition switch in the “ON” position, engine stopped) this lamp does not light up.
Remark The lamp may light up in cold temperatures, but should go out when HST oil temperatures come up to the operating temperature range. AIR CLEANER CLOGGING ALERT LAMP Lamp (5) alerts the operator that the air cleaner is clogged and needs immediate attention. During operation if the air cleaner clog alert lamp should come on do not continue to operate the machine take the machine to a service location and have it serviced immediately. During checks before starting (ignition switch in the “ON” position, engine stopped) this lamp does not light up. WA320PT-5L 2-11