Komatsu — SERVICE DISPLAY

OPERATION Service Alert Display The ID number and item name needing service are displayed on the monitor display, the remaining time to service the item and the number of times a service has been performed are displayed in 3 second intervals. If the service time has already passed, a minus (-) sign appears before the time display. After the display has been on for 30 seconds, it does not appear again until the ignition switch is turned to the ON position again. The service information in the illustration is not shown on the monitor display if an action code is being displayed. If there are two or more items to be displayed, they are displayed in a simultaneous order.

If there are more than 10 items, all the items are displayed in a simultaneous order also, then the display will return to it’s normal display. The display appears when there is 30 hours remaining on the service items time. If the replacement time has passed, a minus (-) sign appears before the time for the first 999 hours. When more than 999 hours have passed, a display is no longer given. The maintenance caution lamp flashes as the replacement time approaches, and after the replacement time has passed. Resetting Service Times After Servicing Once an item has been serviced and the machine is ready to go back into operation it is necessary to reset the service time interval.

It is important to do this in order to keep track of when it will be time to perform service on the machine again. Below is the procedure for resetting the service time interval. 1. To enter reset mode the ignition key must be in the ON position. 2. Press the selector switch button and it will display the odometer. 3. Using the selector switch button scroll thought the menu to the [ MAINTENANCE ] display. 4. Once the [ MAINTENANCE ] display is reached, press the selector switch button to enter the system. 5. Once in the system using the selector switch buttons you can scroll through the eight service items listed on page 2-24. 6.

When you have found the item that was serviced, using the selector button switch reset the service time interval, a [ 00: RESET ] will appear on the monitor display. 3 seconds later a [ YES NO ENTER ] will appear. 7. To reset the service interval, select YES or NO using the selector switch buttons. Once you have chosen yes or no, use the selector button to reset the maintenance time interval If yes is selected the service time interval is reset and a beep is heard. If no is selected the service time is not reset. 2-20 WA320PT-5L